Installation for Single-phrase |
|
Model: PT-01
*For Monthly Consumption from
250kWH - 1000kWH.
Plug in the POWERTUNE Electricity Saver Fimly
into a wall socket nearest to the ELCB box or distribution channel.
|
Model: PT-02
*For Monthly Consumption from
1000kWH - 2000kWH.
Plug in the POWERTUNE Electricity Saver Fimly
into a wall socket nearest to the ELCB box or distribution channel.
|
|
|
 |
 |
Installation for 3-phrase |
|
Model: PT-01
*For Monthly Consumption from
1000kWh - 3000 kWh.
-
Indentify 3 wall socket nearest to the ELCB box or distribution channel
-
Plug in the POWERTUNE Electricity Saver firmly into a wall socket into each phase.
|
Model: PT-02
*For Monthly Consumption from
3000kWh - 6000 kWh.
- Indentify 3 wall socket nearest to the ELCB box or distribution channel
- Plug in the POWERTUNE Electricity Saver firmly into a wall socket into each phase.
|
|
|
|
Model: PT-02
*For Monthly Consumption from 6000kWh - 10,000 kWh.
- Indentify 3 wall socket nearest to the ELCB box or distribution channel
- Plug in the POWERTUNE Electricity Saver firmly into a wall socket into each phase.
|
Things to take Note:
- Do not plug into an extension cord / multiple socket
- For 3-Phase Installation, in most cases,
extra power points will be required from each phase.
- We recommend maximum of 10,000KWH usage per month. Above 10,000KWH, Power.Tune will not be able to support.
PRECAUTION:
- Keep the product away from children.
- You are advised to unplyg the POWERTUNE Electricity Saver ONLY when the LED indicator light is totally off after 5 seconds
|
|
|
|
 |
GUIDES to proper Installations |
| CORRECT INSTALLATION |
INCORRECT INSTALLATION |
Power.Tune must be firmly plugged onto the wall socket |
Do not plug Power.Tune onto loose socket or not firmly plug in the Power.Tune |
|
|
Install the Power.Tune onto Wall Socket |
Do not install Power.Tune on the Extention Multiple Socket |
|
|
Using converter to convert into different plug head is allowed |
Do not plug in the Power.Tune onto the multiple way socket |
|
|
You may also Plug Power.Tune onto the timer plug and control the time to switch on/off the Power.Tune.
To achive better results, swith off the Power.Tune during low electricity consumption periods, eg: after office hour or nobody at home. |
Improper installation of Power.Tune may cause the following problems :-
- Electric shocks
- Surge protector burst
- PCB malfunction
- Power.Tune to burn-out and melted (as we are using Fire/Flame Retardant material, this will not cause fire, other brand may cause fire)
|
|
Installation Chart – No of Units to Install
|
PT-01 |
PT-02
|
KWH/Month |
Single Phase |
3 Phase |
Single Phase |
3 Phase
|
250kwh – 1000kwh
|
1 |
3 |
- |
- |
1001kwh – 2000kwh
|
- |
3 |
1 |
- |
2001kwh – 3000kwh
|
- |
3 |
2 |
- |
3001kwh – 4000kwh
|
- |
- |
2 |
3 |
4001kwh – 5000kwh
|
- |
- |
- |
3 |
5001kwh – 6000kwh
|
- |
- |
- |
3 |
6001kwh – 12000kwh
|
- |
- |
- |
6 |
12001kwh – 20000kwh
|
- |
- |
- |
9 |
Maximum recommended up to 20,000Kwh / Month.
For 3-phase, balance up the number of units into each phase such as 3 units, each phase install 1 unit / 6 units, each phase install 2 units / 9 units, each phase 3 units. |
